2016 Woodrup touring bike pictures, set 1:

[ Set 1-this set ] [ set 2 ] [ more later maybe ] [ Bike & frame info & details ]

More bike stuff on my velo pages.

This set is pix emailed to me by Kevin during the build (which was great!), including the final geometry, tubes & lugs on the bench, in-brazing pix, after paining. Some of these photos are also available on Kevin's photo page at https://www.flickr.com/photos/kevin_sayles_bikes/with/24163893954/.

At the end some pix I made the day it arrived. None too fancy processing here, so colours maybe a little off. Documentation not art!

Press for bigger picture; press again or backspace to return to this index.

More photos! [ Set 1-this set ] [ set 2 ] [ more later maybe ] More bike & trike stuff on my velo pages.

edition: 2019.03.26 | ©robert liebermann
url: http://rjl.us/velo/woodrup/2016Woodruppix-1.htm
[ velo main ] [ contact ] [ HQ ]

Kevin's plan & geometry.
maybe from Bike Cad?
© & made by Kevin Sayles

Tubes & lugs laid out Same table & vice made famous in "Made in England"!
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Main triangle, head badge in place (maybe for marking mounting holes or just for excitement!?).
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

chainstays - and very nice jig (same as used by Lee Cooper and others).
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Seat lug.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Back end set up and ready for brazing.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Seat lug again.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Back end set up and ready for brazing 2.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Frame about done
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Rear rack mounts, seatstay 'weird braze-on', bridge mounts, etc.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Checking rear pump mounting.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Checking rear pump mounting 2.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Checking rear pump mounting 3.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Front end & forks.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Forks - note Paris-Brest crown.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Painted! Surprisingly more gold than green, but equally extinct colour so serendipitously OK.
photo sent by Kevin Sayles during build, 2016
© & made by Kevin Sayles

Rear top view - note pump peg, SS mount, & bridge mounts, etc.
Nikon D800, AI-Nikkor 105/2.5 manual lens
©Robert Liebermann 2016

Head & fork view - note stainless lug edge ridge for cable rub from bar-ends, top tube digicam holster fastening, head tube something mount & pump peg, & under-crown mudguard thread. .
Nikon D800, AI-Nikkor 105/2.5 manual lens
©Robert Liebermann 2016

On the hood of my favourite old & rough 1985 BMW 318-whata great car!
Nikon D800, AI-Nikkor 105/2.5 manual lens
©Robert Liebermann 2016